{"title":"Nozzles \u0026 Tips","description":"\u003cp\u003eJ-Rods, Sharp Shooters, M5 Twist, and More. Nozzle size follows your machine's flow, so pick 5.5 GPM or 8 GPM to see only the tips sized for it.\u003c\/p\u003e","products":[{"product_id":"jrod-with-4-nozzles-for-8-gpm","title":"J-Rod with 4 Nozzle Pre-Assembly, 8 GPM","description":"\u003cp\u003eFour nozzles on one J-Rod, pre-assembled and set up for 8 GPM machines. Change spray pattern and coverage right at the wand, instead of carrying separate wands or a pocket of loose tips.\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJ-Rod 4-way holder with 4 nozzles, pre-assembled\u003c\/li\u003e\n\u003cli\u003eConfigured for 8 GPM\u003c\/li\u003e\n\u003cli\u003eStainless steel holder with quick-connect plugs\u003c\/li\u003e\n\u003cli\u003eFor soft wash chemical application\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy a J-Rod\u003c\/h3\u003e\n\u003cp\u003eWith four tips on one assembly you can adjust reach, coverage and chemical application from one surface to the next without swapping equipment. Built around high-flow machines, it suits house washing and commercial exterior work.\u003c\/p\u003e\n\u003ch3\u003eApplications and Uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHouse washing\u003c\/li\u003e\n\u003cli\u003eCommercial soft washing\u003c\/li\u003e\n\u003cli\u003eRoof and exterior cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfigured for 8 GPM machines. For 5.5 GPM, see \u003ca href=\"\/products\/jrod-with-4-nozzles-for-5-5-gpm\"\u003eJ-Rod with 4 Nozzle Pre-Assembly, 5.5 GPM\u003c\/a\u003e For 10 GPM, see \u003ca href=\"\/products\/jrod-with-4-nozzles-for-10-gpm\"\u003eJ-Rod with 4 Nozzle Pre-Assembly, 10 GPM\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eWant a colored holder? See \u003ca href=\"\/products\/jrod-with-4-nozzle-pre-assembly-color\"\u003eJ-Rod with 4 Nozzle Pre-Assembly, Color\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eMatch the J-Rod to your machine's flow and pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOn the Job\u003c\/h3\u003e\n\u003cp\u003eA J-Rod set up for 8 GPM machines, with four nozzles already fitted on a stainless holder. Change spray pattern and reach right at the wand as you move around a building, instead of carrying extra wands or a pocket of loose tips.\u003c\/p\u003e\u003cp\u003eIt is sized for the extra flow of an 8 GPM machine, like the 8.0 GPM machines on our Poseidon, Poseidon X and Poseidon Dual builds, and it suits house washing, commercial soft washing and roof and exterior work.\u003c\/p\u003e","brand":"Poseidon Equipment","offers":[{"title":"Default Title","offer_id":50621902880816,"sku":null,"price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5548\/8048\/files\/jrod-with-4-nozzles-for-8-gpm-1_ac0c0aee-46d6-454a-99a8-74c0f9f95394.jpg?v=1790463758"},{"product_id":"jrod-with-4-nozzles-for-5-5-gpm","title":"J-Rod with 4 Nozzle Pre-Assembly, 5.5 GPM","description":"\u003cp\u003eFour nozzles on one J-Rod, pre-assembled and set up for 5.5 GPM machines. Change spray pattern and coverage right at the wand, instead of carrying separate wands or a pocket of loose tips.\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJ-Rod 4-way holder with 4 nozzles, pre-assembled\u003c\/li\u003e\n\u003cli\u003eConfigured for 5.5 GPM\u003c\/li\u003e\n\u003cli\u003eStainless steel holder with quick-connect plugs\u003c\/li\u003e\n\u003cli\u003eFor soft wash chemical application\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy a J-Rod\u003c\/h3\u003e\n\u003cp\u003eWith four tips on one assembly you can adjust reach, coverage and chemical application from one surface to the next without swapping equipment. A practical tool for residential and commercial exterior cleaning.\u003c\/p\u003e\n\u003ch3\u003eApplications and Uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHouse washing\u003c\/li\u003e\n\u003cli\u003eSoft washing\u003c\/li\u003e\n\u003cli\u003eExterior cleaning\u003c\/li\u003e\n\u003cli\u003eChemical application\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfigured for 5.5 GPM machines. For 8 GPM, see \u003ca href=\"\/products\/jrod-with-4-nozzles-for-8-gpm\"\u003eJ-Rod with 4 Nozzle Pre-Assembly, 8 GPM\u003c\/a\u003e For 10 GPM, see \u003ca href=\"\/products\/jrod-with-4-nozzles-for-10-gpm\"\u003eJ-Rod with 4 Nozzle Pre-Assembly, 10 GPM\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eWant a colored holder? See \u003ca href=\"\/products\/jrod-with-4-nozzle-pre-assembly-color\"\u003eJ-Rod with 4 Nozzle Pre-Assembly, Color\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eMatch the J-Rod to your machine's flow and pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOn the Job\u003c\/h3\u003e\n\u003cp\u003eA J-Rod set up for 5.5 GPM machines, with four nozzles already fitted on a stainless holder. Change spray pattern and reach right at the wand as you work around a house, instead of carrying extra wands or a pocket of loose tips.\u003c\/p\u003e\u003cp\u003eIt is sized for 5.5 GPM, the machine on our Starter and Pro Series builds, so it is the J-Rod for most residential house wash rigs. Use it for house washing, soft washing and general exterior chemical application.\u003c\/p\u003e","brand":"Poseidon Equipment","offers":[{"title":"Default Title","offer_id":50621902913584,"sku":null,"price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5548\/8048\/files\/jrod-with-4-nozzles-for-5-5-gpm-1_32012b26-4e14-46f5-b966-f4e0b952145e.jpg?v=1790463762"},{"product_id":"c-and-r-dual-nozzle-holder","title":"C\u0026R Dual Nozzle Holder","description":"\u003cp\u003eThe C\u0026amp;R dual nozzle holder provides a compact way to carry and switch between two compatible spray tips. Keeping multiple tips immediately available can improve workflow when application conditions change.\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eC\u0026amp;R\u003c\/li\u003e\n\u003cli\u003eDual nozzle holder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications and Uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSoftwash\u003c\/li\u003e\n\u003cli\u003ePressure washing\u003c\/li\u003e\n\u003cli\u003eNozzle management\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOn the Job\u003c\/h3\u003e\n\u003cp\u003eCarries two tips on the end of your wand, so you can switch spray patterns or chemical rates without stopping to change nozzles. A common setup is a long-reach stream on one side and a wide fan on the other, so you can reach high and cover wide on the same pass around a house.\u003c\/p\u003e\u003cp\u003eIt takes 1\/4 in. male pipe thread tips, so you build it around your machine's output and the way you work. Useful for soft washing and pressure washing alike.\u003c\/p\u003e\n\u003cp\u003eTips that fit: \u003ca href=\"\/products\/1-4-meg-0050-washjet-spray-nozzle\"\u003eMEG 0050\u003c\/a\u003e, \u003ca href=\"\/products\/1-4-mpt-2520-veejet-soaper-nozzle\"\u003eVeeJet 2520\u003c\/a\u003e, \u003ca href=\"\/products\/brass-1-4-veejet-2530-soaper-nozzle\"\u003eVeeJet 2530\u003c\/a\u003e. Want four tips? See the \u003ca href=\"\/products\/jrod-holder-4-way\"\u003eJ-Rod Holder, 4-Way\u003c\/a\u003e.\u003c\/p\u003e","brand":"C\u0026R","offers":[{"title":"Default Title","offer_id":50621903044656,"sku":null,"price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5548\/8048\/files\/c-and-r-dual-nozzle-holder-1_b5302ba6-0870-4a1c-83d3-29c5187e6130.jpg?v=1790463788"},{"product_id":"sharp-shooter-m5-combo","title":"Sharp Shooter M5 Combo","description":"\u003cp\u003eThe Sharp Shooter M5 Combo is a shooter tip module that pairs a Davis Shooter tip with the M5DS Twist nozzle, in one module for downstream chemical application. It comes in two flow sizes to match your machine.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the combo:\u003c\/strong\u003e Davis Shooter tip module with the Davis Shooter tip and the M5DS Twist\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-7 GPM:\u003c\/strong\u003e for machines in the 3 to 7 GPM range, such as our 5.5 GPM units\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-12 GPM:\u003c\/strong\u003e for machines in the 8 to 12 GPM range, such as our 8 and 10 GPM units\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Downstream chemical application with a pressure washer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications and Uses\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHouse washing\u003c\/li\u003e\n\u003cli\u003eRoof and second story chemical application\u003c\/li\u003e\n\u003cli\u003eCommercial building washing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eOn the Job\u003c\/h3\u003e\u003cp\u003eFor downstreaming soap on house washes and commercial buildings with one module on the end of your wand instead of separate parts. Pick the flow size that matches your machine: 3-7 GPM for 5.5 GPM units, 8-12 GPM for 8 and 10 GPM units.\u003c\/p\u003e\u003cp\u003eAlso see the \u003ca href=\"\/products\/x-jet-m5ds-twist-nozzle\"\u003eX-Jet M5DS Twist Nozzle\u003c\/a\u003e, the \u003ca href=\"\/products\/x-jet-m5-adjustable-downstream-chemical-injector-system\"\u003eX-Jet M5 Twist Downstream Kit\u003c\/a\u003e and the \u003ca href=\"\/products\/c-and-r-sharp-shooter-tip\"\u003eC\u0026amp;R Sharp Shooter Tip\u003c\/a\u003e.\u003c\/p\u003e","brand":"X-Jet","offers":[{"title":"3-7 GPM","offer_id":50621905076272,"sku":null,"price":145.0,"currency_code":"USD","in_stock":true},{"title":"8-12 GPM","offer_id":50731205656624,"sku":null,"price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5548\/8048\/files\/file_9efac2a2-a701-41c2-b5b1-8335fcd67537.jpg?v=1791079640"},{"product_id":"x-jet-m5-adjustable-downstream-chemical-injector-system","title":"X-Jet M5 Twist Downstream Kit","description":"\u003cp\u003eThe X-Jet M5 Twist Downstream Kit keeps chemical out of your pressure washer. The nozzle goes on the end of your wand, and as water leaves it, the included suction hose draws chemical from a separate tank and mixes it right in the nozzle. A twist of the nozzle changes the spray from a 5 degree stream to a 60 degree fan, so you do not need a pocket full of tips.\u003c\/p\u003e\n\u003ch3\u003eIn the kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eX-Jet M5 twist-adjust nozzle, 5 to 60 degree spray patterns\u003c\/li\u003e\n\u003cli\u003e15 ft X-Jet suction hose with hose barb\u003c\/li\u003e\n\u003cli\u003e1\/4 in. quick connect plug\u003c\/li\u003e\n\u003cli\u003eColor-coded proportioner tips to set the water to chemical ratio\u003c\/li\u003e\n\u003cli\u003eShut-off ball valve\u003c\/li\u003e\n\u003cli\u003eMushroom strainer for the tank end of the hose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax pressure:\u003c\/strong\u003e 4000 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax temperature:\u003c\/strong\u003e 190°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet:\u003c\/strong\u003e 1\/4 in. quick connect plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical port:\u003c\/strong\u003e 1\/8 in. MPT x 3\/8 in. hose barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReach:\u003c\/strong\u003e about 40 ft or more, depending on your pressure washer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle size:\u003c\/strong\u003e 5.38 x 1.25 x 2.38 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoose your option\u003c\/h3\u003e\n\u003cp\u003eEach kit is sized to your machine's flow by the orifice in the nozzle.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 to 6.5 GPM\u003c\/strong\u003e (#16 orifice): for 5.5 GPM machines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7 to 8 GPM\u003c\/strong\u003e (#20 orifice): for 8 GPM machines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8.5+ GPM\u003c\/strong\u003e (#25 orifice): for 10 GPM machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHouse washing\u003c\/li\u003e\n\u003cli\u003eRoof cleaning\u003c\/li\u003e\n\u003cli\u003eCommercial building washing\u003c\/li\u003e\n\u003cli\u003eLong-range chemical application from the ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSoap and rinse with the same nozzle: take the chemical suction tube out of the tank to rinse.\u003c\/li\u003e\n\u003cli\u003eWorks on compatible cold-water, hot-water and soft wash systems.\u003c\/li\u003e\n\u003cli\u003eThe mixing chart in the photos shows the ratio each colored tip gives at each machine GPM.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOn the Job\u003c\/h3\u003e\n\u003cp\u003eLets a pressure washer put on soft wash chemical from the ground, without running chemical through the pump. The nozzle goes on the end of your wand, the suction hose draws mix from a separate tank, and it mixes right in the nozzle. A twist changes the spray from a 5 degree stream, with reach of about 40 ft or more depending on your machine, to a 60 degree fan.\u003c\/p\u003e\u003cp\u003eOrder it sized to your machine: 5 to 6.5 GPM for 5.5 GPM machines, 7 to 8 GPM for 8 GPM, 8.5+ GPM for 10 GPM. To rinse, pull the suction tube out of the tank and keep spraying with the same nozzle.\u003c\/p\u003e\n\u003cp\u003eRun it from a closed pail with the \u003ca href=\"\/products\/x-jet-chemical-pail-xpsa\"\u003eX-Jet Chemical Pail (XPSA)\u003c\/a\u003e. Nozzle only: \u003ca href=\"\/products\/x-jet-m5ds-twist-nozzle\"\u003eX-Jet M5DS Twist Nozzle\u003c\/a\u003e.\u003c\/p\u003e","brand":"X-Jet","offers":[{"title":"5 to 6.5 GPM","offer_id":50621905109040,"sku":null,"price":190.0,"currency_code":"USD","in_stock":true},{"title":"7 to 8 GPM","offer_id":50621905141808,"sku":null,"price":190.0,"currency_code":"USD","in_stock":true},{"title":"8.5+ GPM","offer_id":50650767687728,"sku":null,"price":190.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5548\/8048\/files\/x-jet-m5-twist-downstream-kit-1-kit.jpg?v=1790705332"},{"product_id":"set-of-3-qc-nozzles-for-8-0-gpm","title":"Set of 3 QC Nozzles for 8.0 GPM","description":"\u003cp\u003eThree quick-connect pressure washer nozzles sized for 8.0 GPM machines: a narrow 15 degree yellow, an all-round 25 degree green and a wide 40 degree white. One set covers stubborn buildup, everyday cleaning and rinsing.\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 quick-connect nozzles: 15 degree (yellow), 25 degree (green) and 40 degree (white)\u003c\/li\u003e\n\u003cli\u003eSized for 8.0 GPM machines\u003c\/li\u003e\n\u003cli\u003eColor-coded by spray angle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications and Uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e15 degree: concrete, equipment washing and stubborn buildup on hard surfaces\u003c\/li\u003e\n\u003cli\u003e25 degree: concrete, building washing and general pressure washing\u003c\/li\u003e\n\u003cli\u003e40 degree: house washing, vehicle washing and rinsing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor 5.5 GPM machines, see the \u003ca href=\"\/products\/set-of-3-qc-nozzles-for-5-5-gpm\"\u003eSet of 3 QC Nozzles for 5.5 GPM\u003c\/a\u003e. Need just one angle? See the \u003ca href=\"\/products\/qc-nozzle-8-gpm\"\u003eQC Nozzle, 8 GPM\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eMatch the nozzle to your machine's rated flow and pressure.\u003c\/li\u003e\n\u003cli\u003eNarrow angles hit harder. Test your distance and pressure on an inconspicuous spot before you clean a sensitive surface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOn the Job\u003c\/h3\u003e\n\u003cp\u003eThe three tips an 8 GPM machine uses most, in one set: 15 degree yellow for stubborn buildup on concrete and equipment, 25 degree green for everyday cleaning, and 40 degree white for rinsing buildings and vehicles.\u003c\/p\u003e\u003cp\u003eA good way to start a new 8 GPM rig or to restock the truck when tips get worn or lost. Each tip is sized for 8.0 GPM, so your high-flow machine builds the pressure it should.\u003c\/p\u003e","brand":"Poseidon Equipment","offers":[{"title":"Default Title","offer_id":50621905338416,"sku":null,"price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5548\/8048\/files\/set-of-3-qc-nozzles-for-8-0-gpm-1_3d860ce1-f5ef-4026-9b04-a0ac54f680fb.jpg?v=1790463912"},{"product_id":"set-of-3-qc-nozzles-for-5-5-gpm","title":"Set of 3 QC Nozzles for 5.5 GPM","description":"\u003cp\u003eThree quick-connect pressure washer nozzles sized for 5.5 GPM machines: a narrow 15 degree yellow, an all-round 25 degree green and a wide 40 degree white. One set covers stubborn buildup, everyday cleaning and rinsing.\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 quick-connect nozzles: 15 degree (yellow), 25 degree (green) and 40 degree (white)\u003c\/li\u003e\n\u003cli\u003eSized for 5.5 GPM machines\u003c\/li\u003e\n\u003cli\u003eColor-coded by spray angle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications and Uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e15 degree: concrete, equipment washing and stubborn buildup on hard surfaces\u003c\/li\u003e\n\u003cli\u003e25 degree: concrete, building washing and general pressure washing\u003c\/li\u003e\n\u003cli\u003e40 degree: house washing, vehicle washing and rinsing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor 8.0 GPM machines, see the \u003ca href=\"\/products\/set-of-3-qc-nozzles-for-8-0-gpm\"\u003eSet of 3 QC Nozzles for 8.0 GPM\u003c\/a\u003e. Need just one angle? See the \u003ca href=\"\/products\/qc-nozzle-5-5-gpm\"\u003eQC Nozzle, 5.5 GPM\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eMatch the nozzle to your machine's rated flow and pressure.\u003c\/li\u003e\n\u003cli\u003eNarrow angles hit harder. Test your distance and pressure on an inconspicuous spot before you clean a sensitive surface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOn the Job\u003c\/h3\u003e\n\u003cp\u003eThe three tips a 5.5 GPM machine uses most, in one set: 15 degree yellow for stubborn buildup on concrete and equipment, 25 degree green for everyday cleaning, and 40 degree white for rinsing siding and vehicles.\u003c\/p\u003e\u003cp\u003eA good way to start a new 5.5 GPM rig, like our Starter and Pro Series builds, or to restock the truck when tips get worn or lost. Each tip is sized for 5.5 GPM, so the machine builds the pressure it should.\u003c\/p\u003e","brand":"Poseidon Equipment","offers":[{"title":"Default Title","offer_id":50621905371184,"sku":null,"price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5548\/8048\/files\/set-of-3-qc-nozzles-for-5-5-gpm-1_5e191241-adb8-4d31-831a-484e3c3f446c.jpg?v=1790463917"},{"product_id":"pa-fixed-injector-2-3-mm-for-downstreaming","title":"Fixed Chemical Injector for Downstreaming","description":"\u003cp\u003eA fixed downstream chemical injector: it goes on the outlet side of your pump and pulls soap into the water stream, so the chemical never passes through the pump. Pick the orifice that matches your machine's flow: the 2.3 mm is sized for 5 to 8 GPM machines and the 2.1 mm for 3 to 5 GPM machines. The one in our photos is stamped 2.3, 5-8 GPM and General Pump part 100822, made in the USA.\u003c\/p\u003e\n\u003cp\u003eA downstream injector only draws when the pressure at the gun is low. Switch your dual lance to its soap side, or put on a soaper or other low pressure tip, and it pulls chemical through the hose barb; put a high pressure tip back on and it stops.\u003c\/p\u003e\n\u003ch3\u003eChoose your option\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.3 mm (5 to 8 GPM)\u003c\/strong\u003e: .091 in. orifice, General Pump 100822. For our 5.5 GPM and 8 GPM machines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.1 mm (3 to 5 GPM)\u003c\/strong\u003e: .083 in. orifice, General Pump 100821. For our 4.2 GPM machine and other 3 to 5 GPM machines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs on every option\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet and outlet:\u003c\/strong\u003e 3\/8 in. male NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical inlet:\u003c\/strong\u003e 1\/4 in. hose barb with a built-in check valve (stainless ball and spring, Viton o-ring)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody:\u003c\/strong\u003e Brass, with stainless steel and Viton internals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax temperature:\u003c\/strong\u003e 190°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow direction:\u003c\/strong\u003e Arrow on the body, point it downstream (away from the pump)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it works with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA dual lance, like the \u003ca href=\"\/products\/3-foot-deluxified-zzdbl-h-d-dual-lance\"\u003e3 ft\u003c\/a\u003e or \u003ca href=\"\/products\/6-foot-deluxe-h-d-dual-lance\"\u003e6 ft\u003c\/a\u003e H.D. dual lance\u003c\/li\u003e\n\u003cli\u003eLow pressure soap tips, like the \u003ca href=\"\/products\/1-4-mpt-2520-veejet-soaper-nozzle\"\u003eVeeJet 2520\u003c\/a\u003e and \u003ca href=\"\/products\/brass-1-4-veejet-2530-soaper-nozzle\"\u003e2530\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eWant the bypass setup too? See the \u003ca href=\"\/products\/downstream-injector-bypass-kit\"\u003eDownstream Injector Bypass Kit\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOn the Job\u003c\/h3\u003e\n\u003cp\u003eA simple way to soap with a pressure washer. The injector sits on the outlet side of the pump and pulls chemical into the water stream, so soap never passes through the pump. It only draws when the pressure at the gun is low: switch your dual lance to the soap side or put on a soaper tip and it pulls; put a pressure tip back on and it stops.\u003c\/p\u003e\u003cp\u003ePick the orifice to your machine: 2.3 mm for our 5.5 GPM and 8 GPM machines, 2.1 mm for our 4.2 GPM machine. Brass body with stainless and Viton internals, and a built-in check valve on the chemical barb.\u003c\/p\u003e","brand":"General Pump","offers":[{"title":"2.3 mm (5 to 8 GPM)","offer_id":50621905600560,"sku":null,"price":19.99,"currency_code":"USD","in_stock":true},{"title":"2.1 mm (3 to 5 GPM)","offer_id":50654176706608,"sku":null,"price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5548\/8048\/files\/pa-fixed-injector-2-3-mm-for-downstreaming-1_6f835ca7-4406-46a2-bcc6-8164a7336c34.jpg?v=1790463952"},{"product_id":"1-4-mpt-2520-veejet-soaper-nozzle","title":"1\/4 in. MPT 2520 VeeJet Soaper Nozzle","description":"\u003cp\u003eA brass VeeJet 2520 soaper nozzle with a 1\/4 in. male pipe thread. It lays down a flat 25 degree fan of soap at low pressure, so it is the tip you put on the soap side of a dual lance or in a threaded nozzle holder when you are downstreaming. The 20 is its size: it flows 2.0 GPM at 40 PSI, a little tighter than the 2530.\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray:\u003c\/strong\u003e Flat fan, 25 degrees (at 40 PSI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 2520 = 25 degree, 2.0 GPM at 40 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1\/4 in. MPT (male)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Low pressure soap and chemical application (up to 500 PSI)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAny 1\/4 in. female pipe thread nozzle holder, like the \u003ca href=\"\/products\/c-and-r-dual-nozzle-holder\"\u003eC\u0026amp;R Dual Nozzle Holder\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe soap side of a dual lance, like the \u003ca href=\"\/products\/3-foot-deluxified-zzdbl-h-d-dual-lance\"\u003e3 ft\u003c\/a\u003e or \u003ca href=\"\/products\/6-foot-deluxe-h-d-dual-lance\"\u003e6 ft\u003c\/a\u003e H.D. dual lance\u003c\/li\u003e\n\u003cli\u003eMachines with a downstream injector, which only pulls soap when a low pressure tip like this is in use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a high pressure tip: don't use it for rinsing at full pressure.\u003c\/li\u003e\n\u003cli\u003eWant a little more flow? See the \u003ca href=\"\/products\/brass-1-4-veejet-2530-soaper-nozzle\"\u003eVeeJet 2530\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOn the Job\u003c\/h3\u003e\n\u003cp\u003eThe soap tip for downstreaming. It lays down a flat 25 degree fan of soap at low pressure, which is also what tells a downstream injector to start drawing chemical. Put it on the soap side of a dual lance or in a threaded nozzle holder and you soap as you walk the wall.\u003c\/p\u003e\u003cp\u003eBrass, 1\/4 in. MPT, rated for low pressure soap and chemical up to 500 PSI. The 2520 flows 2.0 GPM at 40 PSI, a little tighter than the 2530, so pick it when you want a bit less soap per pass.\u003c\/p\u003e","brand":"Poseidon Equipment","offers":[{"title":"Default Title","offer_id":50621905764400,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5548\/8048\/files\/1-4-mpt-2520-veejet-soaper-nozzle-1_5bcde542-cf1c-4557-af07-c0561a1cf4cb.jpg?v=1790463973"},{"product_id":"brass-1-4-veejet-2530-soaper-nozzle","title":"Brass 1\/4 in. VeeJet 2530 Soaper Nozzle","description":"\u003cp\u003eA brass VeeJet 2530 soaper nozzle with a 1\/4 in. male pipe thread. It puts out a flat 25 degree fan of soap at low pressure for downstreaming from a dual lance or a threaded nozzle holder. The 30 is its size: 3.0 GPM at 40 PSI, so it lets more soap through than the 2520.\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray:\u003c\/strong\u003e Flat fan, 25 degrees (at 40 PSI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 2530 = 25 degree, 3.0 GPM at 40 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1\/4 in. MPT (male)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Low pressure soap and chemical application (up to 500 PSI)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAny 1\/4 in. female pipe thread nozzle holder, like the \u003ca href=\"\/products\/c-and-r-dual-nozzle-holder\"\u003eC\u0026amp;R Dual Nozzle Holder\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe soap side of a dual lance, like the \u003ca href=\"\/products\/3-foot-deluxified-zzdbl-h-d-dual-lance\"\u003e3 ft\u003c\/a\u003e or \u003ca href=\"\/products\/6-foot-deluxe-h-d-dual-lance\"\u003e6 ft\u003c\/a\u003e H.D. dual lance\u003c\/li\u003e\n\u003cli\u003eMachines with a downstream injector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a high pressure tip: don't use it for rinsing at full pressure.\u003c\/li\u003e\n\u003cli\u003eWant a little less flow? See the \u003ca href=\"\/products\/1-4-mpt-2520-veejet-soaper-nozzle\"\u003eVeeJet 2520\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOn the Job\u003c\/h3\u003e\n\u003cp\u003eA soap tip for downstreaming that lets more chemical through. It puts out a flat 25 degree fan at low pressure, so a downstream injector draws soap, and it goes on the soap side of a dual lance or in a threaded nozzle holder.\u003c\/p\u003e\u003cp\u003eThe 2530 flows 3.0 GPM at 40 PSI, more than the 2520, so pick it when you want heavier soap coverage on dirty siding, fleets or buildings. Brass, 1\/4 in. MPT, rated for low pressure soap and chemical up to 500 PSI. Never use it to rinse at full pressure.\u003c\/p\u003e","brand":"Poseidon Equipment","offers":[{"title":"Default Title","offer_id":50621905993776,"sku":null,"price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5548\/8048\/files\/brass-1-4-veejet-2530-soaper-nozzle-1_33747c48-7f2a-4ac2-8d42-19c2fce26bb6.jpg?v=1790464010"},{"product_id":"1-4-meg-0050-washjet-spray-nozzle","title":"1\/4 in. MEG 0050 WashJet Spray Nozzle","description":"\u003cp\u003eA WashJet 1\/4 in. MEG 0050 spray nozzle: a 0 degree solid stream tip with a 1\/4 in. male pipe thread. A solid stream holds together and throws a long way, so this is the tip for reaching high walls and second stories with soap or rinse water when you are working at low pressure. The 50 is its size: 5.0 GPM at 40 PSI.\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray:\u003c\/strong\u003e 0 degree solid stream\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 0050 = 0 degree, 5.0 GPM at 40 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1\/4 in. MNPT (male)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Spraying Systems WashJet MEG, with an internal guide vane for a tight stream\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAny 1\/4 in. female pipe thread nozzle holder, like the \u003ca href=\"\/products\/c-and-r-dual-nozzle-holder\"\u003eC\u0026amp;R Dual Nozzle Holder\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe soap side of a dual lance, like the \u003ca href=\"\/products\/3-foot-deluxified-zzdbl-h-d-dual-lance\"\u003e3 ft\u003c\/a\u003e or \u003ca href=\"\/products\/6-foot-deluxe-h-d-dual-lance\"\u003e6 ft\u003c\/a\u003e H.D. dual lance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOn the Job\u003c\/h3\u003e\n\u003cp\u003eThe tip for reaching high. A 0 degree solid stream holds together and throws a long way, so at low pressure it carries soap or rinse water up to second stories and high walls from the ground. Use it on the soap side of a dual lance or in a threaded nozzle holder.\u003c\/p\u003e\u003cp\u003eThe internal guide vane keeps the stream tight. Its size, 0050, means 0 degree and 5.0 GPM at 40 PSI. Pair it with a fan tip on a dual holder, so you can switch between reaching high and covering wide without changing anything.\u003c\/p\u003e\n\u003cp\u003eFan soap tips: \u003ca href=\"\/products\/1-4-mpt-2520-veejet-soaper-nozzle\"\u003eVeeJet 2520\u003c\/a\u003e and \u003ca href=\"\/products\/brass-1-4-veejet-2530-soaper-nozzle\"\u003eVeeJet 2530\u003c\/a\u003e.\u003c\/p\u003e","brand":"Poseidon Equipment","offers":[{"title":"Default Title","offer_id":50621906026544,"sku":null,"price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5548\/8048\/files\/1-4-meg-0050-washjet-spray-nozzle-1_1e1c5356-7cb4-4a03-892f-c4b6f3df514c.jpg?v=1790464014"},{"product_id":"1-4-in-mpt-nozzle","title":"1\/4 in. MPT Nozzle","description":"\u003cp\u003eThreaded 1\/4 in. MPT spray tips for pressure washers, in 15 and 25 degree patterns sized from 2.0 to 10 GPM, plus 40 degree and 65 degree soap tips for 10 GPM machines. Use one as a replacement or add it to a spray assembly matched to your machine.\u003c\/p\u003e\n\u003ch3\u003eSpecs on every option\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1\/4 in. MPT\u003c\/li\u003e\n\u003cli\u003eThreaded pressure washer spray tip\u003c\/li\u003e\n\u003cli\u003eSized to a machine flow (GPM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoose your option\u003c\/h3\u003e\n\u003cp\u003e15 degree tips concentrate the spray for more impact over a smaller area. 25 degree tips balance coverage and impact for general cleaning. 40 degree tips spread the spray wide for rinsing, and the 65 degree tip is a low-pressure soap tip for putting on detergent.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e15025\u003c\/strong\u003e: 15 degree, for 2.5 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15040\u003c\/strong\u003e: 15 degree, for 4 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15050\u003c\/strong\u003e: 15 degree, for 5 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15060\u003c\/strong\u003e: 15 degree, for 6 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25020\u003c\/strong\u003e: 25 degree, for 2.0 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25025\u003c\/strong\u003e: 25 degree, for 2.5 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25045\u003c\/strong\u003e: 25 degree, for 4.5 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25055\u003c\/strong\u003e: 25 degree, for 5.5 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25080\u003c\/strong\u003e: 25 degree, for 8 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15100\u003c\/strong\u003e: 15 degree, for 10 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25100\u003c\/strong\u003e: 25 degree, for 10 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40100\u003c\/strong\u003e: 40 degree, for 10 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e65100\u003c\/strong\u003e: 65 degree soap tip, for 10 GPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePick the tip for your machine's actual flow and pressure. The right size keeps the machine performing as intended.\u003c\/li\u003e\n\u003cli\u003eA 15 degree tip hits hard over a small area. Check the surface and your distance first, and use it only on surfaces that can take it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNozzle selection chart\u003c\/h3\u003e\n\u003cp\u003eThe last photo is a nozzle selection chart. Find your machine's max GPM down the left side and its max PSI across the top: where the row and column meet is the nozzle size for your system.\u003c\/p\u003e\n\u003ch3\u003eOn the Job\u003c\/h3\u003e\n\u003cp\u003eThreaded spray tips for J-Rods, nozzle holders and any spray assembly that uses 1\/4 in. male pipe thread instead of quick connects. The last three digits are the size: match them to your machine, for example 055 for a 5.5 GPM machine, 080 for 8 GPM and 100 for 10 GPM.\u003c\/p\u003e\u003cp\u003eThe first digits are the angle. 15 degree hits hard on a small area, 25 degree is the everyday cleaning tip, 40 degree is for rinsing, and the 65 degree is a low pressure soap tip. Load a J-Rod with the four you use most and you can change pattern at the wand without carrying loose tips.\u003c\/p\u003e\n\u003cp\u003eHolders: \u003ca href=\"\/products\/jrod-holder-4-way\"\u003eJ-Rod Holder, 4-Way\u003c\/a\u003e and \u003ca href=\"\/products\/c-and-r-dual-nozzle-holder\"\u003eC\u0026amp;R Dual Nozzle Holder\u003c\/a\u003e.\u003c\/p\u003e","brand":"Poseidon Equipment","offers":[{"title":"15025 (15 degree, 2.5 GPM)","offer_id":50627762782256,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"15040 (15 degree, 4 GPM)","offer_id":50627762815024,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"15050 (15 degree, 5 GPM)","offer_id":50627762847792,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"15060 (15 degree, 6 GPM)","offer_id":50627762880560,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"25020 (25 degree, 2.0 GPM)","offer_id":50627762913328,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"25025 (25 degree, 2.5 GPM)","offer_id":50627762946096,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"25045 (25 degree, 4.5 GPM)","offer_id":50627762978864,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"25055 (25 degree, 5.5 GPM)","offer_id":50627763011632,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"25080 (25 degree, 8 GPM)","offer_id":50627763044400,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"15100 (15 degree, 10 GPM)","offer_id":50654224842800,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"25100 (25 degree, 10 GPM)","offer_id":50654224875568,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"40100 (40 degree, 10 GPM)","offer_id":50654224908336,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"65100 (65 degree soap, 10 GPM)","offer_id":50654224941104,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5548\/8048\/files\/1-4-mpt-25080-nozzle-1_4da6db43-bb79-4286-8c4f-ea544bb714bc.jpg?v=1790463792"},{"product_id":"c-and-r-sharp-shooter-tip","title":"C\u0026R Sharp Shooter Tip","description":"\u003cp\u003eC\u0026amp;R Sharp Shooter tips in four flow sizes, from 4 GPM to 10-12 GPM. Each size has its own color, so you can tell them apart when you carry more than one.\u003c\/p\u003e\n\u003ch3\u003eSpecs on every option\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eC\u0026amp;R Sharp Shooter tip\u003c\/li\u003e\n\u003cli\u003eColor-coded by flow rate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoose your option\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 GPM, purple\u003c\/strong\u003e: Sized for 4 GPM machines. Forced-cone soft wash tip for more accurate chemical application and reach. House washing, roof cleaning and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 GPM, green\u003c\/strong\u003e: Stainless steel. Sized for 6 GPM machines. A precision spray outlet, built for frequent professional use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 GPM, blue\u003c\/strong\u003e: Stainless steel. Sized for 8 GPM machines. For building washing, concrete and commercial cleaning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-12 GPM, red\u003c\/strong\u003e: Sized for 10 GPM machines. Forced-cone tip for high-flow soft wash systems and long-range chemical application, on large commercial buildings, roofs and two- to three-story exteriors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eKeep your machine's flow, pressure and tip size matched.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eOn the Job\u003c\/h3\u003e\n\u003cp\u003eSharp Shooter tips throw a tight, accurate stream, so you put chemical exactly where you aim it, at a distance. That means house washes, roofs and commercial buildings from the ground, with less mix wasted on windows, plants and the driveway.\u003c\/p\u003e\u003cp\u003ePick the color that matches your machine: purple for 4 GPM, green for 6 GPM, blue for 8 GPM and red for 10 GPM machines. The 4 GPM and 10-12 GPM tips are forced-cone soft wash tips, and the red is the one for long-range work on two- to three-story exteriors. Color coding makes it easy to grab the right tip when you carry more than one.\u003c\/p\u003e\n\u003cp\u003eWant it on an adjustable X-Jet body? See the \u003ca href=\"\/products\/sharp-shooter-m5-combo\"\u003eSharp Shooter M5 Combo\u003c\/a\u003e.\u003c\/p\u003e","brand":"C\u0026R","offers":[{"title":"4 GPM, purple","offer_id":50627763404848,"sku":null,"price":35.99,"currency_code":"USD","in_stock":true},{"title":"6 GPM, green","offer_id":50627763437616,"sku":null,"price":35.99,"currency_code":"USD","in_stock":true},{"title":"8 GPM, blue","offer_id":50627763470384,"sku":null,"price":35.99,"currency_code":"USD","in_stock":true},{"title":"10-12 GPM, red","offer_id":50627763503152,"sku":null,"price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5548\/8048\/files\/c-and-r-sharp-shooter-tip-8-gpm-blue-ss-1_d5c5ecf9-8c85-409d-85f0-737d6c62fcbc.jpg?v=1790463718"},{"product_id":"jrod-holder-4-way","title":"J-Rod Holder, 4-Way","description":"\u003cp\u003eA 4-way J-Rod nozzle holder for soft wash wands. It keeps four tips on the wand, so you move between spray patterns without swapping equipment. Choose stainless steel, or a colored holder in blue, green, red or yellow.\u003c\/p\u003e\n\u003ch3\u003eSpecs on every option\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4-way J-Rod holder\u003c\/li\u003e\n\u003cli\u003eQuick-connect plugs, one per tip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoose your option\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel\u003c\/strong\u003e: Holds four 1\/4 in. spray tips on a soft wash wand. Stainless construction for frequent, heavy use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue, Green, Red or Yellow\u003c\/strong\u003e: The 4-way holder in color. Color-coding makes it quick to tell your setups apart on the job.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWant it with the nozzles already fitted? See the J-Rod with 4 Nozzle Pre-Assembly in \u003ca href=\"\/products\/jrod-with-4-nozzles-for-5-5-gpm\"\u003e5.5 GPM\u003c\/a\u003e, \u003ca href=\"\/products\/jrod-with-4-nozzles-for-8-gpm\"\u003e8 GPM\u003c\/a\u003e or \u003ca href=\"\/products\/jrod-with-4-nozzle-pre-assembly-color\"\u003ecolor\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOn the Job\u003c\/h3\u003e\n\u003cp\u003eFour tips on one holder at the end of your soft wash wand. Turn to the tip you need, whether that is reach for the gable, a fan for the siding or a soap tip, and keep working instead of walking back for another wand or digging in your pocket for loose tips.\u003c\/p\u003e\u003cp\u003eIt holds four 1\/4 in. spray tips with a quick-connect plug for each. Choose stainless steel for heavy daily use, or a colored holder in blue, green, red or yellow, so each crew member or each machine has its own setup and nobody grabs the wrong one.\u003c\/p\u003e\n\u003cp\u003eTips: \u003ca href=\"\/products\/1-4-in-mpt-nozzle\"\u003e1\/4 in. MPT Nozzle\u003c\/a\u003e.\u003c\/p\u003e","brand":"Poseidon Equipment","offers":[{"title":"Stainless steel","offer_id":50627767500848,"sku":null,"price":21.99,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":50627767533616,"sku":null,"price":21.99,"currency_code":"USD","in_stock":true},{"title":"Green","offer_id":50651384152112,"sku":null,"price":21.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":50651384184880,"sku":null,"price":21.99,"currency_code":"USD","in_stock":true},{"title":"Yellow","offer_id":50651384217648,"sku":null,"price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5548\/8048\/files\/jrod-holder-4-way-stainless-steel-1_a86f3899-0f58-4c59-bd4c-d82afd22cebd.jpg?v=1790463768"},{"product_id":"pa-ur25-rotating-nozzle","title":"PA UR25 Rotating Nozzle","description":"\u003cp\u003ePA UR25 rotating nozzles turn the spray into a rotating pattern for concentrated cleaning on concrete and other hard surfaces. Three models, sized by flow and rated pressure.\u003c\/p\u003e\n\u003ch3\u003eSpecs on every option\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRotating nozzle\u003c\/li\u003e\n\u003cli\u003eConcentrated rotary cleaning action for hard surfaces\u003c\/li\u003e\n\u003cli\u003eFor concrete cleaning and equipment washing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoose your option\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue, 5.5 GPM, 3,650 PSI\u003c\/strong\u003e: For 5.5 GPM machines. More impact on stubborn areas from a compact spray assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed, 6.0 GPM, 5,100 PSI\u003c\/strong\u003e: Aggressive cleaning for stubborn buildup and hard-surface restoration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue, 8.0 GPM, 3,650 PSI\u003c\/strong\u003e: For high-flow 8.0 GPM commercial machines and heavy-duty surface cleaning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMatch your machine's flow and pressure to the nozzle before use, and stay within its rated pressure.\u003c\/li\u003e\n\u003cli\u003eChoose by your machine's output and the surface you are cleaning, to avoid damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOn the Job\u003c\/h3\u003e\n\u003cp\u003eA rotating nozzle spins the spray into a fast-moving pattern that hits much harder than a fan tip, for the spots a surface cleaner and a 15 degree tip will not finish: edges, steps, corners, stubborn buildup on concrete and heavy grime on equipment.\u003c\/p\u003e\u003cp\u003ePick by your machine. The blue 5.5 GPM and blue 8.0 GPM models are rated 3,650 PSI for our 5.5 and 8 GPM machines; the red 6.0 GPM model is rated 5,100 PSI for aggressive cleaning and hard-surface restoration. It hits hard, so keep it moving and keep it off soft surfaces.\u003c\/p\u003e\n\u003cp\u003eEveryday tips: \u003ca href=\"\/products\/qc-nozzle-5-5-gpm\"\u003eQC Nozzle, 5.5 GPM\u003c\/a\u003e and \u003ca href=\"\/products\/qc-nozzle-8-gpm\"\u003eQC Nozzle, 8 GPM\u003c\/a\u003e.\u003c\/p\u003e","brand":"PA","offers":[{"title":"Blue, 5.5 GPM, 3,650 PSI","offer_id":50627768614960,"sku":null,"price":59.99,"currency_code":"USD","in_stock":true},{"title":"Red, 6.0 GPM, 5,100 PSI","offer_id":50627768680496,"sku":null,"price":69.99,"currency_code":"USD","in_stock":true},{"title":"Blue, 8.0 GPM, 3,650 PSI","offer_id":50627768647728,"sku":null,"price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5548\/8048\/files\/ur25-pa-blue-rotating-nozzle-5-5-gpm-1_79e94201-ed0e-45cb-b22b-48729b6e3b7c.jpg?v=1790463714"},{"product_id":"x-jet-m5ds-twist-nozzle","title":"X-Jet M5DS Twist Nozzle","description":"\u003cp\u003eX-JET M5DS twist nozzles apply cleaning solution from a distance, and a twist of the nozzle adjusts the spray pattern. Two flow ranges: 3-7 GPM and 7-12 GPM.\u003c\/p\u003e\n\u003ch3\u003eSpecs on every option\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal-mix: draws and applies cleaning solution without a conventional downstream injector setup\u003c\/li\u003e\n\u003cli\u003eTwist to adjust the spray pattern\u003c\/li\u003e\n\u003cli\u003eApplies cleaning solution from a safe working distance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoose your option\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-7 GPM\u003c\/strong\u003e: For lower-flow pressure washers, including 5.5 GPM machines. Apply chemical without converting your machine to a dedicated low-pressure chemical pump. House washing, exterior cleaning and soft washing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7-12 GPM\u003c\/strong\u003e: For our 8 GPM and 10 GPM machines. House, building, roof and exterior washing, and soft wash chemical application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePick the flow range that matches your machine's GPM.\u003c\/li\u003e\n\u003cli\u003eHandle chemicals properly and check that the nozzle suits your equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOn the Job\u003c\/h3\u003e\n\u003cp\u003eThe X-Jet twist nozzle on its own, for applying cleaning solution from a safe distance without a conventional downstream injector setup. Twist it to change the spray pattern from a reaching stream to a wide fan, so one nozzle covers the eaves and the walls.\u003c\/p\u003e\u003cp\u003ePick the flow range for your machine: 3-7 GPM for lower-flow machines including 5.5 GPM, or 7-12 GPM for our 8 GPM and 10 GPM machines. Use it for house, building and roof washing and soft wash chemical application, without converting the machine to a dedicated chemical pump.\u003c\/p\u003e\n\u003cp\u003eWant the full kit with suction hose and ratio tips? See the \u003ca href=\"\/products\/x-jet-m5-adjustable-downstream-chemical-injector-system\"\u003eX-Jet M5 Twist Downstream Kit\u003c\/a\u003e.\u003c\/p\u003e","brand":"X-Jet","offers":[{"title":"3-7 GPM","offer_id":50627769532464,"sku":null,"price":75.99,"currency_code":"USD","in_stock":true},{"title":"7-12 GPM","offer_id":50627769565232,"sku":null,"price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5548\/8048\/files\/x-jet-m5ds-twist-nozzle-7-12-gpm-1_edc4d0f1-9bc5-4428-97c5-f3ddb6e59d30.jpg?v=1790463693"},{"product_id":"qc-nozzle-5-5-gpm","title":"QC Nozzle, 5.5 GPM (15 to 40 degree)","description":"\u003cp\u003eQuick-connect pressure washer nozzles sized for 5.5 GPM machines, in three color-coded spray angles: 15 degree yellow, 25 degree green and 40 degree white. Snap in the angle the job calls for and swap it in seconds.\u003c\/p\u003e\n\u003ch3\u003eSpecs on every option\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Quick connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSized for:\u003c\/strong\u003e 5.5 GPM machines (the code ends in 055)\u003c\/li\u003e\n\u003cli\u003eColor-coded by spray angle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoose your option\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 degree, yellow (15055)\u003c\/strong\u003e: A narrow, concentrated fan that puts more force on a smaller area. For concrete, equipment washing and commercial pressure washing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 degree, green (25055)\u003c\/strong\u003e: The all-round angle, balancing coverage and cleaning impact. For concrete, building washing and general pressure washing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40 degree, white (40055)\u003c\/strong\u003e: A wide fan for rinsing and general cleaning, when coverage matters more than impact. For house washing, vehicle washing and rinsing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSized for 5.5 GPM machines. Running a different machine? See \u003ca href=\"\/products\/qc-nozzle-8-gpm\"\u003eQC Nozzle, 8 GPM\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eMatch the nozzle to your machine's rated flow and pressure.\u003c\/li\u003e\n\u003cli\u003eNarrow angles hit harder. Test your distance and pressure on an inconspicuous spot before you clean a sensitive surface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOn the Job\u003c\/h3\u003e\n\u003cp\u003eEveryday pressure washing tips for a 5.5 GPM machine, the machine on our Starter and Pro Series builds. Snap in the angle the job calls for: 15 degree yellow for stubborn spots on concrete and equipment, 25 degree green for general cleaning, 40 degree white for rinsing house siding and vehicles.\u003c\/p\u003e\u003cp\u003eThe 055 in the code means it is sized for 5.5 GPM, which keeps your machine building the pressure it should. Tips wear and get lost, so it is worth keeping spares of the angles you use most.\u003c\/p\u003e","brand":"Poseidon Equipment","offers":[{"title":"15 degree, yellow (15055)","offer_id":50651005681712,"sku":null,"price":3.99,"currency_code":"USD","in_stock":true},{"title":"25 degree, green (25055)","offer_id":50651005714480,"sku":null,"price":3.99,"currency_code":"USD","in_stock":true},{"title":"40 degree, white (40055)","offer_id":50651005747248,"sku":null,"price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5548\/8048\/files\/qc-15055-yellow-nozzle-1_c02f5a18-c72c-4078-bc84-4d338fb33157.jpg?v=1790463753"},{"product_id":"qc-nozzle-8-gpm","title":"QC Nozzle, 8 GPM (15 to 40 degree)","description":"\u003cp\u003eQuick-connect pressure washer nozzles sized for 8 GPM machines, in three color-coded spray angles: 15 degree yellow, 25 degree green and 40 degree white. Snap in the angle the job calls for and swap it in seconds.\u003c\/p\u003e\n\u003ch3\u003eSpecs on every option\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Quick connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSized for:\u003c\/strong\u003e 8 GPM machines (the code ends in 080)\u003c\/li\u003e\n\u003cli\u003eColor-coded by spray angle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoose your option\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 degree, yellow (15080)\u003c\/strong\u003e: A narrow, concentrated fan that puts more force on a smaller area. For concrete, equipment washing and heavy-duty pressure washing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 degree, green (25080)\u003c\/strong\u003e: The all-round angle, balancing coverage and cleaning impact. For concrete, building washing, equipment cleaning and commercial pressure washing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40 degree, white (40080)\u003c\/strong\u003e: A wide fan for rinsing and general cleaning, when coverage matters more than impact. For building washing, vehicle washing and rinsing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSized for 8 GPM machines. Running a different machine? See \u003ca href=\"\/products\/qc-nozzle-5-5-gpm\"\u003eQC Nozzle, 5.5 GPM\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eMatch the nozzle to your machine's rated flow and pressure.\u003c\/li\u003e\n\u003cli\u003eNarrow angles hit harder. Test your distance and pressure on an inconspicuous spot before you clean a sensitive surface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOn the Job\u003c\/h3\u003e\n\u003cp\u003eEveryday pressure washing tips for an 8 GPM machine. Snap in the angle the job calls for: 15 degree yellow for stubborn buildup, concrete and equipment, 25 degree green for general and commercial cleaning, 40 degree white for rinsing buildings and vehicles.\u003c\/p\u003e\u003cp\u003eThe 080 in the code means it is sized for 8 GPM, so your high-flow machine builds the pressure it should. Tips wear and get lost, so keep spares of the angles you use most. A 5.5 GPM tip on an 8 GPM machine will not perform right, so match the code to the machine.\u003c\/p\u003e","brand":"Poseidon Equipment","offers":[{"title":"15 degree, yellow (15080)","offer_id":50651019542576,"sku":null,"price":3.99,"currency_code":"USD","in_stock":true},{"title":"25 degree, green (25080)","offer_id":50651019575344,"sku":null,"price":3.99,"currency_code":"USD","in_stock":true},{"title":"40 degree, white (40080)","offer_id":50651019608112,"sku":null,"price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5548\/8048\/files\/qc-15080-yellow-nozzle-1_9fd0654e-de51-45ef-8894-e641a799646c.jpg?v=1790463749"},{"product_id":"jrod-with-4-nozzle-pre-assembly-color","title":"J-Rod with 4 Nozzle Pre-Assembly, Color","description":"\u003cp\u003eThe J-Rod 4-nozzle pre-assembly on a colored holder. Pick your color, then the GPM that matches your machine. Color-coded holders make it quick to spot the right J-Rod on the job.\u003c\/p\u003e\n\u003ch3\u003eSpecs on every option\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJ-Rod 4-way holder with 4 nozzles, pre-assembled\u003c\/li\u003e\n\u003cli\u003eColored holder with quick-connect plugs\u003c\/li\u003e\n\u003cli\u003eFor soft wash chemical application\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoose your option\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Blue, Green, Red or Yellow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPM\u003c\/strong\u003e: 5.5 GPM or 8 GPM. Pick the one that matches your machine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications and Uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHouse washing\u003c\/li\u003e\n\u003cli\u003eSoft washing\u003c\/li\u003e\n\u003cli\u003eCommercial exterior cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrefer stainless steel? See the J-Rod with 4 Nozzle Pre-Assembly for \u003ca href=\"\/products\/jrod-with-4-nozzles-for-5-5-gpm\"\u003e5.5 GPM\u003c\/a\u003e or \u003ca href=\"\/products\/jrod-with-4-nozzles-for-8-gpm\"\u003e8 GPM\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eMatch the J-Rod to your machine's flow and pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOn the Job\u003c\/h3\u003e\n\u003cp\u003eA J-Rod that is ready to use out of the box: four nozzles already fitted on a colored holder. Pick your color, then 5.5 GPM or 8 GPM to match your machine, and you can change reach and coverage right at the wand from one surface to the next.\u003c\/p\u003e\u003cp\u003eColors make it easy to tell setups apart on the rig, for example one color per machine or per crew member, so the 8 GPM J-Rod never ends up on the 5.5 GPM machine. Made for soft wash chemical application on house washing and commercial exteriors.\u003c\/p\u003e","brand":"Poseidon Equipment","offers":[{"title":"Blue \/ 5.5 GPM","offer_id":50651286470704,"sku":null,"price":54.99,"currency_code":"USD","in_stock":true},{"title":"Blue \/ 8 GPM","offer_id":50651286503472,"sku":null,"price":54.99,"currency_code":"USD","in_stock":true},{"title":"Green \/ 5.5 GPM","offer_id":50651286536240,"sku":null,"price":54.99,"currency_code":"USD","in_stock":true},{"title":"Green \/ 8 GPM","offer_id":50651286569008,"sku":null,"price":54.99,"currency_code":"USD","in_stock":true},{"title":"Red \/ 5.5 GPM","offer_id":50651286601776,"sku":null,"price":54.99,"currency_code":"USD","in_stock":true},{"title":"Red \/ 8 GPM","offer_id":50651286634544,"sku":null,"price":54.99,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ 5.5 GPM","offer_id":50651286667312,"sku":null,"price":54.99,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ 8 GPM","offer_id":50651286700080,"sku":null,"price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5548\/8048\/files\/color-jrod-with-4-nozzles-for-8-gpm-1_77092199-fbba-4d77-81cc-8a8bf99505ea.jpg?v=1790463775"},{"product_id":"jrod-with-4-nozzles-for-10-gpm","title":"J-Rod with 4 Nozzle Pre-Assembly, 10 GPM","description":"\u003cp\u003eFour nozzles on one J-Rod, pre-assembled and set up for 10 GPM machines. Change spray pattern and coverage right at the wand, instead of carrying separate wands or a pocket of loose tips.\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJ-Rod 4-way holder with 4 nozzles, pre-assembled\u003c\/li\u003e\n\u003cli\u003eConfigured for 10 GPM\u003c\/li\u003e\n\u003cli\u003eStainless steel holder with quick-connect plugs\u003c\/li\u003e\n\u003cli\u003eFor soft wash chemical application\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy a J-Rod\u003c\/h3\u003e\u003cp\u003eWith four tips on one assembly you can adjust reach, coverage and chemical application from one surface to the next without swapping equipment. Sized for high-flow 10 GPM machines on house washing and commercial exterior work.\u003c\/p\u003e\n\u003ch3\u003eApplications and Uses\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHouse washing\u003c\/li\u003e\n\u003cli\u003eCommercial soft washing\u003c\/li\u003e\n\u003cli\u003eRoof and exterior cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConfigured for 10 GPM machines. For smaller machines, see \u003ca href=\"\/products\/jrod-with-4-nozzles-for-5-5-gpm\"\u003eJ-Rod with 4 Nozzle Pre-Assembly, 5.5 GPM\u003c\/a\u003e and \u003ca href=\"\/products\/jrod-with-4-nozzles-for-8-gpm\"\u003eJ-Rod with 4 Nozzle Pre-Assembly, 8 GPM\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eMatch the J-Rod to your machine's flow and pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOn the Job\u003c\/h3\u003e\n\u003cp\u003eA J-Rod set up for 10 GPM machines, with four nozzles already fitted on a stainless holder. Change spray pattern and reach right at the wand as you move from the gable to the siding to the eaves, instead of carrying extra wands or a pocket of loose tips.\u003c\/p\u003e\u003cp\u003eSized for the extra flow of a 10 GPM machine, it suits house washing, commercial soft washing and roof and exterior work. Order it with the machine and your nozzles are matched from day one.\u003c\/p\u003e","brand":"Poseidon Equipment","offers":[{"title":"Default Title","offer_id":50654224711728,"sku":null,"price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5548\/8048\/files\/jrod-with-4-nozzles-for-8-gpm-1_78ce310e-77cd-4bc7-b066-d1900200fe1c.jpg?v=1790712956"},{"product_id":"rotary-pressure-washer-nozzle","title":"Rotary Pressure Washer Nozzle","description":"\u003cp\u003eA rotary nozzle spins a zero degree jet in a circle, so you get the cutting force of a 0 degree tip over a much wider path. A ceramic tip and a filter built into the nozzle keep it running and protect your machine from debris.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrifice:\u003c\/strong\u003e 3.0 or 5.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray:\u003c\/strong\u003e Rotating zero degree jet, circular pattern\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e High speed ceramic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter:\u003c\/strong\u003e Inline water filter built into the nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.0:\u003c\/strong\u003e 1\/4 in. quick connect (BE 85.210.130)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5.0:\u003c\/strong\u003e BE 85.210.150, for high flow machines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNot for wood, siding or painted surfaces.\u003c\/li\u003e\n\u003cli\u003eStart spraying from further away and move in as needed.\u003c\/li\u003e\n\u003cli\u003ePoint the gun down before you pull the trigger, so the ceramic tip seats in the forward position.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eOn the Job\u003c\/h3\u003e\u003cp\u003eThe nozzle for hard, stubborn flatwork the surface cleaner leaves behind: edges, steps, gum, stains and heavy buildup on driveways, sidewalks and patios. Match the orifice to your machine: the 5.0 is sized for high flow units.\u003c\/p\u003e\u003cp\u003eSee also the \u003ca href=\"\/products\/pa-ur25-rotating-nozzle\"\u003ePA UR25 Rotating Nozzle\u003c\/a\u003e and our \u003ca href=\"\/products\/qc-nozzle-5-5-gpm\"\u003eQC nozzles\u003c\/a\u003e.\u003c\/p\u003e","brand":"BE Power Equipment","offers":[{"title":"3.0","offer_id":50731203985456,"sku":null,"price":90.0,"currency_code":"USD","in_stock":true},{"title":"5.0","offer_id":50731204018224,"sku":null,"price":90.0,"currency_code":"USD","in_stock":true},{"title":"4.0","offer_id":50799334817840,"sku":null,"price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5548\/8048\/files\/BEPowerEquipment_ProductImage_Accessory_85.210.130_A_8dc1f62f-7bf3-47de-a7b6-bc20c5df30b4.jpg?v=1791079512"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5548\/8048\/collections\/pz-cat-nozzles.webp?v=1790905222","url":"https:\/\/poseidonequipment.com\/collections\/nozzles-tips\/fits-8-gpm.oembed","provider":"Poseidon Equipment","version":"1.0","type":"link"}