WaterBoss Spray Gun, 750 PSI, 1/2 in. NPT

Built for Soft Wash Work

Stainless steel internals and nozzles hold up against corrosion, and the fiberglass-reinforced body shrugs off the scuffs and marks that come with being dropped on a job. The stay-cool handle has an insulating air pocket and a cushioned grip, and the low-force trigger takes very little squeeze, so it stays comfortable through a long day of spraying.

In the Box

• WaterBoss 750 spray gun
• Three stainless steel nozzles: small, medium and large orifice (one comes installed in the gun)
• 1/2 in. swivel
• Extra nozzle seat

Good to Know

• Not recommended for 12V pumps or for high-pressure machines (pressure washers).
• For 7 GPM 12V pump systems, see the Gilmour soft wash gun.

On the Job

A soft wash gun for systems bigger than a 12V setup. Rated 750 PSI with a 1/2 in. high-flow inlet, it moves a lot of mix at soft wash pressure, and the adjustable tip goes from a wide fan for walls to a straight jet for reaching rooflines and second stories. Three stainless nozzle sizes let you match the orifice to the pump and the job.

Stainless internals resist corrosion from mix, the fiberglass-reinforced body takes drops, and the stay-cool handle with a low-force trigger stays comfortable through a long day of spraying. Not for 12V pumps or pressure washers.

On a 7 GPM 12V system, use the Gilmour soft wash gun.